|
tricO
Apr 17, 2005 21:57:59 GMT -5
Post by FurY on Apr 17, 2005 21:57:59 GMT -5
in the shun pu trico guide theres "2.0 power: 24.0(h) 2.1 power: 22.0(h) 2.2 power: 20.0(h) 2.3 power: 18.0(h) 2.4 power: 16.0(h) 50.0(f) 2.5 power: 14.0(h) 40.0(f) 2.6 power: 13.0(h) 30.0(f) 2.7 power: 12.0(h) 28.0(f) 2.8 power: 11.0(h) 26.0(f) 2.9 power: 10.5(h) 24.0(f) 3.0 power: 10.0(h) 22.0(f) 3.1 power: 9.5(h) 20.0(f) 3.2 power: 9.0(h) 18.0(f) 3.3 power: 8.5(h) 17.0(f) 3.4 power: 8.0(h) 16.0(f) 3.5 power: 7.5(h) 15.0(f) 3.6 power: 7.5(h) 14.0(f) 3.7 power: 7.0(h) 13.5(f) 3.8 power: 6.5(h) 13.0(f) 3.9 power: 6.5(h) 12.5(f) 4.0 power: 6.0(h) 12.1(f) "
is this for right to left or left to right? and if its one of them, how do u caculate for the other side
|
|
|
tricO
Apr 17, 2005 23:34:06 GMT -5
Post by CreeDo on Apr 17, 2005 23:34:06 GMT -5
This info isn't telling you shots, it's telling you what angle you should choose after you have already decided how much power you will use. And how to decide how much power?
Left->Right: 1.5 ; 2.6 ; 3.6 ; 4.6 Right->Left: 0.9 ; 2.2 ; 3.2 ; 4.2
There is your left and right info.
The long table you pasted tells you how many angles to subtract (starting from 90) for half and full screen. This applies to BOTH sides. So let's say you decide to use 2.6 bars... because you're shooting left-->right .. look up 2.6 bars on the chart and it says it's 13 distance units to half screen, and 30 to full screen. Therefore to hit half screen with 2.6 bars, the angle is 90-13 (angle 77) and to hit full screen it's 90-30 (angle 60).
So... what if you want to shoot right-->left? Will angle 60 still work with 2.6 bars? Well, yes it will go the correct distance and hit the enemy... but it won't 3in1 because 2.6 bars is NOT listed as a good 3in1 power for shooting right-->left.
|
|
|
tricO
Apr 18, 2005 4:57:27 GMT -5
Post by FurY on Apr 18, 2005 4:57:27 GMT -5
so if i use 2.6 in left 2 right no matta wat ngle it will hit 3in1 in 0 wind?
|
|